A primary textile thread decoration that forms on the fabric surface is called embroidery. Basically, it is to give wearable garments more value on attraction. In this article, I will show you three easy ways to remove embroidery from your clothes.
In some cases, it is necessary to remove the embroidery from clothes. Though the embroidery isn’t attached to clothes like an adhesive sticker or logo we need some special care by hand to remove embroidery from clothes.
To remove embroidery from clothes, cut the layer of embroidery first from fabric with scissors, shears, pinking shares, seam ripper, thread clipper, and embroidery scissors. Avoid extra pressure because under the embroidery thread your fabric is situated.
Here are the 3 methods of how to remove embroidery from clothes
Method 1: Remove embroidery by cutting with sharp tools (scissors/seam ripper/sharp knife)
The most conventional way is to cut the sewing thread with scissors or a seam ripper. This is also very popular in-home conditions and reachable to everyone.
Step 1: Cut the surface of embroidery
First of all, you have to give a gentle scratch with the sharp edge of a scissor or small knife. Be careful about giving extra pressure, because it could damage fabric that is just situated in the bottom part of the embroidery.
Step 02: Pick the yarn of embroidery with a seam ripper
After a while, you will see some yarns from embroidery designs coming out. You have to pick those spiky cut yarn with a seam ripper. I am also suggesting you make it loose with tweezers.
Step 03: Use a tweezer to the behind part of the fabric:
After cutting the Surface of the embroidery, you can use To check the behind part of the fabric to pull out the excessive yarn.
This is very important to reduce the damage. Carefully open the threads gently from the back of the cloth by a tweezer. The task of untying the yarn is not very difficult but time-consuming.
Some stitch marks can be seen after sewing the thread. Embroidered stitch sticks very tightly to the fabric so it happens.
After finishing the pick-up of cut thread, it’s time to use a lint brush to remove the thread dust.
Method 2: Cut embroidery threads with a trimmer machine to remove from clothes
Step 01: Trimmer setting
To cut embroidery with a trimmer you have to set up your trimmer machine first. You have to set the cutting to comb with zero millimeters. Trimmer blade surface directly will help to cut the embroidery sewing thread to break down and cut with the tension of the fabric.
Step 02: Put the blade on the embroidery surface
Now it’s time to run the trimmer machine in a gentle process onto the fabric surface. Firstly it will get a little messed up, but don’t worry, I am pretty sure that will work tremendously and it’s experimental.
Embroidery yarn will be cut with granule formation.
On the other hand, you have to trim from the stitch corner first about the embroidery patch. And all the processes are the same as before explained.
Step 03: Pull out the embroidery yarns
Like other processes, it is time to remove the embroidery stitch yarns from the fabric surface. For this reason, you need to arrange a tweezer to remove the extra yarn from the back part of the fabric.
Method 3: Using an embroidery eraser remove the embroidery from clothes
The embroidery eraser is now available to erase embroidery. It’s working like a trimmer as well. Embroidered garments generally need to remove the embroidery design, which is necessary to remove and redecoration. Embroidery erasers have good cutting metal portions which are grinding the embroidery from the surface.
Step 01: Use on to the front part of embroidery
You can use it also remove the patch and sew the embroidery stitch as well. An embroidery eraser is basically an electric machine with lightweight but powerful motor facilities. It’s actually made of grinding embroidery from clothes. Place it and rub it first from the front part of the clothes. Stitches will cut and break their bonding in the first phase.
Step 02: Cut the rest of the embroidery yarn from the bottom part of the clothes
After grinding the top part of the embroidery, now it is time to look at and clear the back part of the embroidery.
It chips away at power (with a battery-powered battery). It is utilized to eliminate machine weaving lines without harming the texture by any stretch of the imagination.
In the same way, clear the cut and uncut embroidery stitches from the surface of the fabric, Embroidery stitches are generally made of cut both sides of embroidery stitches.
In reality, the best apparatus to eliminate weaving is a fasten eraser. It is a helpful expert weaving line eliminating instrument to have; particularly if you need to consistently do this.
Assuming that you are an expert who maintains a weaving business this is a wise venture. You must eliminate that misstep and that excessively quick.
Time is cash in a business.
How to remove embroidery marks/wrinkles from clothes after removing embroidery?
Specifically, we are using either electric or metal conventional tools to remove and cut embroidery from fabric. But after removing it, the embroidery marks are important thing to remove from clothes permanently.
1. By Ironing
Normal embroidery sewing machine gives pressure and stitches more per unit place than hand embroidery. To remove the mark or wrinkle, you can use ironing after removing the embroidery.
Iron will help you to give a flat and mark-free surface of fabric after your embroidery erases operation.
2. Use Adhesive remover while erasing embroidery
Some marks come from embroidery adhesive which is situated in a dry formation under the embroidery patch.
For commercial purposes, embroidery adhesive is used for attaching the external embroidery patch and other embroidery designs.
A stain stitch after that attach to the side of the embroidery patch. You can use adhesive remover first to the design to remove the adhesive, you need to give a wash after the erase with a machine.
In small designs and embroidery, you also can use nail polish remover as an adhesive remover.
Embroidery removal is getting necessary sometimes at home or for industrial purposes. Generally, we use handcraft tools or commercial machines. Those instruments make it all more straightforward.
About the fasten eraser – this is a specific apparatus with sharp edges, and seems to be a hair trimmer/razor however for certain exceptional stunts. It under the lines snatches the string and clasps them. You can likewise keep various cutting apparatuses – crease ripper, little scissors, tweezers. After treatment, removing the mark and giving an iron press is also important.
Read More Articles On: